Contents
PET recycling equipment Operational Precautions
Preparations before operation
- Check that all machines are properly placed and not leaning or suspended, to prevent them from collapsing or malfunctioning during operation, which could have negative consequences.
- Check that the power cord is properly connected and the PET recycling equipment is properly grounded to prevent electrical shock accidents.
- Be sure there is no overhead load on the machine.
- Try running the machine first to ensure that it operates properly.
During Operation
- Operators should wear protective goggles, gloves, and other safety equipment to prevent materials from splashing into their eyes and prevent other accidents.
- Do not put your body inside any PET recycling equipment.
- Make sure the feed is evenly distributed and do not put in too much material at once, exceeding the machine’s capacity.
- Adjust the distance between the crusher blade and the sieve bottom to prevent too many fragments.
- When cleaning materials, make sure to give them enough washing time, and you can also add suitable cleaning agents to ensure that all stubborn stains are removed.
- The temperature of the hot washing tank should not be too high, usually maintained at 85-95 degrees Celsius. Higher temperatures can affect the adhesiveness of PET bottle flakes and prevent them from being made into fibers.
After Operation
- Turn off all power sources.
- Pay attention to cleaning the inner chamber of the washing machine and regularly disassemble and maintain it.
- If there is a malfunction, it is essential to immediately stop the machine, start troubleshooting, and have it repaired by a professional.
Daily Maintenance Guide
Daily Maintenance
- After utilizing, keep the device powered off and thoroughly clean the inner chamber, especially the parts that are prone to accumulating impurities, such as the screen and conveyor belt, etc.
- Regularly checking the wear and tear of the equipment and adding lubricating oil as instructed in the manual can help maintain its performance.
Annual Overhaul
- The equipment is inspected and maintained annually, including the electrical system, control system, and machinery.
- Focus on inspecting equipment that has been in use for a long time, and consider replacing or upgrading certain key parts to improve equipment efficiency.
Conclusion
By following these guidelines, you can effectively improve the efficiency of your PET recycling equipment . For specific installation and operation procedures for each device, please refer to the user manual or consult our after-sales personnel. Shuli will provide the most comprehensive technical support.
